April 2, 2012
CHOICE No.202
We are painted by Japanese Golf Magazine "CHOICE". Center Shafted KOMBI and Next Generation PZ face milling were given a big headline in the magazine.
EntryAuthor M.Sasaya : 2:20 PM
February 10, 2012
Sight Dot
There are several ways to add sight dot in putter head. One is center of cavity, and another is middle position of putter head.
As you can see these pictures, needle is pointed in middle of putter head for sight dot. However, we add sight dot in head's center of gravity for this putter.
Therefore, most important thing to add sight dot is to figure out position where club designer will add it.
EntryAuthor M.Sasaya : 4:02 PM
January 30, 2012
Multiple inserts GF00A putter was completed in Today
Total Weight: 600g
Head Weight: 432g
Swing Weight: H2.4
Lie Angle: 71.5°
Loft Angle(Sole): 6°
Real Loft Angle: 5°
Face Angle: 4°open / Shaft Angle: 1.3°open
Frequency: 326cpm
Shaft: Gold's Factory Original 34"(Spine Aligned)
Grip: Gold's Factory Original(Black)
EntryAuthor M.Sasaya : 6:35 PM
January 26, 2012
Almost done, Multiple inserts GF00A putter
Our GA00F putter head is 350g. After making total of 23 inserts holes in the head, head weight reduced to 244g, and all 23 insets were even 192g.
From now, we will add Next generation premium zone face milling, and reduce head weight to 384g because customer want to do.
EntryAuthor M.Sasaya : 3:33 PM
January 24, 2012
Scotty Cameron STUDIO SELECT LAGUNA 2
This order is from U.S.A.
The content of works are to add Next Generation PZ face milling and change finish to Tour Teflon Black.
We are always receiving order and inquiry from this our English site.
Many people care about payment because we accept payment by bank transfer in now.
It is not a bother and you can ask any time from this site.
EntryAuthor M.Sasaya : 3:29 PM
January 23, 2012
Multiple inserts GF00A putter
Our multiple inserts GF00A putter is a work in progress.
In a final, we will make total of 23 inserts holes in the head.
EntryAuthor M.Sasaya : 5:56 PM
January 19, 2012
Tungsten Weight in KOMBI Sole Plate.
This is our major modify for Scotty Cameron KOMBI.
Making KOMBI head to be center shafted, MOI is lost because center shafted is less off set than normal bent shaft.
In order to compensate the MOI, we recommend adding tungsten Weight in KOMBI sole plate.
EntryAuthor M.Sasaya : 4:43 PM
January 16, 2012
ARC reactor
This is our new ARC reactor.
Design is looks like Scotty Cameron's 2012 California series line.
However, Our Red dot is more transparent and shinier because our ARC reactor is made by Aluminum. Also, role of ARC reactor is vibration absorber and soft feeling.
EntryAuthor M.Sasaya : 5:41 PM
January 12, 2012
Scotty Cameron KOMBI Center Shafted Putters
We modified over 200 Scottty Cameron Kombi putters center shafted with next Generation PZ face milling from last year summer.
We already have done 20 Kombi center shafted putters from the new year began.
Most of Kombi modified orders are from domestic. In fact, many golfers in outside of Japan also have interest to modify Kombi putter, but they do not know how to take process the order.
So, Please do not hesitate to ask advice to us.
You can ask to our distributors too.
EntryAuthor M.Sasaya : 6:32 PM
January 10, 2012
Scotty Cameron KOMBI putter
Everyday, We make Scotty Cameron KOMBI putter to center shafted.
Many customers who order center shafted KOMBI also order with next Generation PZ face milling at the same time. We recommend both modifications for Scotty Cameron KOMBI putter at least.
If you want the putter more modificated, you add Tungsten Weight on sole palte like pictuer. Head weight will be 25g heavier, and total weight will be around 540g.
EntryAuthor M.Sasaya : 6:57 PM
January 6, 2012
Tungsten Sole Weight
This is Cameron style our hand made tungsten sole weight.
Normal Cameron’s sole weight is made by stainless. Also, their heaviest 30g sole weight are made by copper.
Our tungsten sole weight can be made heavy to 40g. Also, we can make it to fit all Scotty Cameron series such as Studio Select, California, and Kombi.
However, it can not be interchangeable and it can not be desorbed by weight wrench tool. So, Please use it with Epoxy.
EntryAuthor M.Sasaya : 2:58 PM
January 5, 2012
EPON AF-502 Sole Tungsten,New Arc Reactor
This is modified EPON AF-502 head.
We took injected shock-absorbent gel off from the head.
In stead of the gel, we insert 3 arc reactors for vibration absorber and soft feeling.
Also, the center of gravity is more helped by 2 tungsten weights placed in the sole.
EntryAuthor M.Sasaya : 5:07 PM
November 22, 2011
Scotty Cameron KOMBI L Center Neck
We have so many orders to make Scotty Cameron KOMBI to make it center shafted everyday.
We made 31pcs of Scotty Cameron KONBI to center shafted after 25th of July, and still we have 10pcs back order, not only domestic but also foreign countries.
New neck and plug old hosel 29,400yen + New Straight Shaft 3,990yen = 33,390yen + Carriage
EntryAuthor M.Sasaya : 2:02 PM
October 28, 2011
What is Hand Made?
Hand Made wedge is grind by hand using belt sander each by each. Changing the sand paper from around #80 to around #1000, to make it smooth.
Instead of that, mass-product is made by barrel polishing machine, it can polish without hand and can polish a lot of at the same time.
Now there is no maker without using barrel polishing machine except Gold's Factory in the world. That's why Gold's Factory wedge is very sharp, and mass-product is very round.
EntryAuthor M.Sasaya : 10:09 AM
September 21, 2011
Scotty Cameron 350G GSS Restoration
Scotty Cameron GSS is Stainless Steel, so it's not easily rust, but rust slowly. The color became yellow little bit.
Also, clear translucent red paint will dim slowly. It need restoraiton sometime.
EntryAuthor M.Sasaya : 10:35 AM
August 16, 2011
Weekly Golf Digest(2011,8,12) No.28
Gold's Factory has introduced by this Weekly Golf Digest(2011,8,12) No.28.
"Instead of using the golf clubs on the shelf, use their own order-made ones," the idea has taken root in Japan nowadays.
EntryAuthor M.Sasaya : 4:07 PM
Golf Magazine Waggle(Sep. 2011)
Gold's Factory has introduced by this Golf Magazine Waggle(Sep. 2011).
The upper left image, heis a very famous comedian who likes to play golf so much.
We explaind how to choose the length.
EntryAuthor M.Sasaya : 3:47 PM
June 24, 2011
Scotty Cameron California Del Mar + Sapphire
Three arc reactors, two the seal, and sapphire insert, also three sight lines, a pair of obit around G-mark.
Total Weight: 534g
Head Weight: 369g
Swing Weight: D1.5
Lie Angle: 71°
Loft Angle(Sole): 5°
Real Loft Angle: 4°
Face Angle: 4°open / Shaft Angle: 1.3°open
Frequency: 334cpm
Shaft: Scotty Cameron 33"
Grip: Scotty Cameron
EntryAuthor M.Sasaya : 2:24 PM
Red Trinity & Blue Trinity
These are Red Trinity & Blue Trinity, the base model is Newport2 GSS Replice.
This is the order from Hong Kong distributor.
The face milling is not just "DEEP MILLED", we call the milling "Next Generation PZ milling" much deeper than Scotty Cameron. This is the deepest and the softest feeling in the world.
We modify more than 400pcs putters every year and continuing more than 10years. We have the biggest share of machine milling and modifying Golf club business in the world.
You can trust Gold's Factory, because we have the data of putters more than 5,000pcs, not only original putters, but any maker's putters.
EntryAuthor M.Sasaya : 12:00 PM
June 16, 2011
Pray For Japan H/C
Pray For Japan H/C, it's the charity item for the 2011 off the Pacific coast of Tohoku Earthquake.
It's 100% made in Japan. The sewing factory in Japan is almost all bankrupted. Only small hand-made studio is existed. This H/C will help those industries in Japan as well.
EntryAuthor M.Sasaya : 2:08 PM
June 14, 2011
Balance Wrench(Ratchet Type)
This is the new version of balance wrench. The balance weight is for studio select series and California series.
Ratchet Type is more power full, and easy to use. This is for Professional club maker, not for amateur golfer, must be used individual responsibility.
EntryAuthor M.Sasaya : 6:42 PM
June 6, 2011
Center Neck Welding
Center Neck Welding including cut the original neck, milled new neck, weld the neck, and new straight shaft is 33,390円.
If you buy XPERIMENTAL PROTOTYPE center neck putter, it could be around 2,000 or 3,000US dollar.
We have made more than 50pcs, almost 100pcs center neck welding putter. Gold's Factory has the biggest manufacturing share of modified putter in the world.
EntryAuthor M.Sasaya : 6:15 PM
June 1, 2011
Snow Flakes Initial Hand Stamp(TitliestTVD-R C-C)
Head: TitliestTVD-R C-C
Shaft: True Temper DG Spinner(Wedge)
Balance: D6
Length: 35inch
Grip: Golf Pride Tour Velvet Rubber 58round.
EntryAuthor M.Sasaya : 5:34 PM
May 30, 2011
Newport 2 GSS Replica "TRINITY"
Total Weight: 519g
Head Weight: 350g
Swing Weight: D8.4
Lie Angle: 71.5°
Loft Angle(Sole): 6°
Real Loft Angle: 5°
Face Angle: 4°(open)
Frequency: 366cpm
Shaft: Gold's Factory Original(34inch)
Grip: Gold's Factory Original(Black)
Head Cover: Gold's Factory Original
Newport2 GSS Replica 92,400円
Sight Dot 3,150円
Next Generation P-Z Milling 18,900円
TRINITY 57,750円
(Orbit Around-G 28,875円, Arc Reactor 7,875円, Bulls eye 21,000円)
Total Retail Price 172,200yen
EntryAuthor M.Sasaya : 2:44 PM
May 24, 2011
Platinum Plating(Rhodium Plating)
This is the most expensive plating. We call it Platinum Plating, but not plating with Platinum.
It's plated with Rhodium. Rhodium is more expensive than Platinum, and Rhodium plating usually used for Plating Platinum.
The price for Platinum Plating is 36,750yen, it's about US$450. It's very expensive, but very beautiful.
EntryAuthor M.Sasaya : 1:17 PM
April 11, 2011
Snow Flakes Initial Hand Stamp
These American wedge is not adjusted Accurately.
You need to adjust neck angle and swing balance, maybe snow flacked like this, if you need to take the shaft and grip out.
EntryAuthor M.Sasaya : 2:34 PM
Cherry Blossom in Itabashi Tokyo Japan
Gold's Factory is located in Itabashi Tokyo Japan.
Itabashi means Bridge Wooden. Many Japanese name is connected to bridge like Bridgestone.
And the bridge which named Itabashi is in the picture. It use to be made by wood. It's very beautiful in this season.
EntryAuthor M.Sasaya : 1:13 PM
March 31, 2011
Trinity(Arc Reactor, Seal, Obit Around-G)
Gold's Factory TRINITY RED
Gold's Factory TRINITY BLUE
Arc Reactor Red and Blue.
Obit Around-G
Red Seal and Orihalcon.
EntryAuthor M.Sasaya : 3:24 PM
March 29, 2011
Multiple Tungsten Insert Putter New Version
This is coming soon. Trunslucent color on Tungsten, or tungsten inside tungsten, aluminum inside tungsten.
Resale price maybe around $3,000.00
EntryAuthor M.Sasaya : 6:18 PM
March 24, 2011
Weight Up And Weight Down
This is the new style of weight up tungsten and aluminum insert for weight down.
Both is translucent colors. Sole weight is made by stainless steel and center translucent is tungsten insert, it's about 10g up using 2cs. aluminum insert is 4g down for only 1pcs.
EntryAuthor M.Sasaya : 1:46 PM